Shop Powders

Anodized Yellow Anodized Yellow is a matte-finish translucent yellow coating that is suitable for interior and exterior use. This product requires a silver or chrome base coat.

ANSI 61 GrayA match to the industry standard ANSI 61 Gray

A distinctly unique and chromatic Optically Variable (ColorShift/Color Changing) pearlescent pigment that travels between Purple, Pink, Copper and Orange and finishes to a fine pearl sheen. Pictured over a black base coat. Use .25 - 3% Ratio of KP Pigment to Clear.

Anthractic Gray TGIC A cool standard color dark gray. 92% Gloss Level. Features Oil & Fuel ResistantGreat for Both Interior & Exterior Conditions

ANTIQUE BRONZE This color has an aged, antique look with a metallic bronze finish. This powder is durable for interior and exterior conditions. Formulation Change: 04/05/21

Antique White Urethane Antique White Urethane is a smooth gloss white. Durable for all conditions. Single step process. Features Does Not Require a Clear TopcoatOil & Fuel ResistantGreat for Both Interior & Exterior Conditions

A strongly metallic Optically Variable (ColorShift/Color Changing) Interference pearl pigment that shifts between a wide spectrum of Blues and Purples. Finishes with a good degree of sparkle and sheen. Pictured over a black and white base coat. Use .25 - 3% Ratio of KP Pigment to Clear.

Argent Silver TGIC A nice silver with heavy metallic flakes. Features Requires Clear Topcoat Oil & Fuel Resistant with Clear Topcoat Use as base for Translucents, Candies and Shimmers

An Optically Variable (ColorShift/Color Changing) pigment that travels from Purple to Red to Orange. An high saturation ColorShift with vivid and chromatic highlights and down-flops. Pictured over a black basecoat. Use .25 - 3% Ratio of KP Pigment to Clear.

ASA 70 GrayA match to the industry standard ASA 70 gray. 80-90% gloss level.

An Optically Variable (ColorShift/Color Changing) pearl pigment that travels from deep shades of Green to Blue. A dark colorshift with a pearlescent sheen. Pictured over a black base coat. Use .25 - 3% Ratio of KP Pigment to Clear.

Atomic Pink Aftershock This is a vibrant pink coating with a vein-like texture underneath. Application Instructions: Partial Cure: 15 min. total time in oven preheated to 400�F. Then apply our Super Mirror Clear and fully cure. * This powder requires a clear coat for the Illusion Effect. ** This coating can be used without a clear coat, but it will not be UV stable. Also, without a clear coat, this powder should only be cleaned with soap and water. Petroleum or solvent-based cleaners will...