Nanner Peel Chemical Stripper - 1 or 5 Gallons

Nanner Peel Chemical Stripper is a water-based powder paint remover that is non-toxic, biodegradable, and ecologically safe. It’s ideal for stripping aluminum other non-ferrous metals.

This stripper can be used at full concentration or diluted up to 50%. The operating temperature of the bath is 165-175°F. Drum heaters can be purchased here: 5 Gallon Drum Heater. We recommend using a stainless-steel drum with a removable lid. Cover with the lid when not in use to help prevent evaporation.

• Prepare a strip tank with lid and proper ventilation.
• Submerge parts in solution (can be diluted up to 50%). Recommended dwell time is 20 minutes in heated bath (dwell time may vary). For best results heat solution to 165-175 °F
• Rinse parts using fresh water and pressure washer.

Features:

• Especially designed for aluminum and non-ferrous metals. Can be used on ferrous metals.
  Please use extra caution as it can be damaging to certain magnesium alloys.
• Contains no methylene chloride- safe for use.
• Low vapor pressure reduces VOC’s
• Environmentally friendly

This chemical is produced by Cherokee Chemical Co.